Input/Turbine Speed Sensor Circuit No Signal
Was bedeutet das?
Code P0717 indicates a problem with the transmission input/turbine speed sensor.
Haftungsausschluss: Dieser Diagnosecode ist Teil des OBD2-Standards und gilt für Acura Mdx Modelle von 1996 bis 2026. Bitte beachten Sie jedoch, dass dies von der genauen Motorkonfiguration abhängt.
Häufige Ursachen
Defekter Eingangs-/Turbinendrehzahlsensor
Niedriger, verschmutzter oder verbrannter Getriebeölstand
Beschädigter oder gebrochener Kabelbaum
Zu beachtende Symptome
- Motorkontrollleuchte leuchtet
- Getriebe rutscht zwischen den Gängen
- Hartes oder ruckhaftes Schalten
- Getriebe bleibt in einem Gang stecken
Wie man diagnostiziert
Häufige Lösungen
**Replace the Input/Turbine Speed Sensor:** This is the most frequent solution if the sensor itself is found to be faulty (e.g., open circuit, incorrect resistance, or no signal output during live data monitoring). Ensure the replacement sensor is an OEM equivalent or a high-quality aftermarket part.
**Repair or Replace Damaged Wiring/Connector:** If the wiring harness leading to the sensor or the sensor connector itself is found to be corroded, chafed, or broken, the damaged section must be professionally repaired or the entire sub-harness replaced. Use proper soldering techniques and heat-shrink tubing for durable, weather-resistant repairs.
**Clean Corroded Electrical Connections:** If corrosion is identified at the sensor connector or the TCM/PCM connector, carefully clean the affected pins using a specialized electrical contact cleaner and a small brush. After cleaning, apply a thin layer of dielectric grease to the connections to prevent future corrosion and ensure optimal electrical conductivity.