P0700 Code: Transmission Control System (MIL Request)
CodePage.genericDisclaimer
Was bedeutet das?
Code P0700 indicates the Transmission Control Module (TCM) has detected a malfunction and is requesting the PCM to illuminate the Check Engine Light. This is an informational code — there will be additional, more specific transmission codes stored.
Diagnostic system: Transmission control and shift monitoring
On a Kia K5, the P0700 code should be diagnosed as part of the transmission control and shift monitoring group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Kia K5
- Defektes Getriebe-Schaltmagnetventil
- Niedriger, verschmutzter oder verbrannter Getriebeölstand
- Verschlissener oder defekter Ventilkörper
- Defekter Drehmomentwandler oder Wandlerüberbrückungskupplung
- Defekter Eingangs-/Turbinendrehzahlsensor
- Defekter Ausgangsdrehzahlsensor
- Defektes Getriebedruckregelmagnetventil
- Beschädigter oder gebrochener Kabelbaum
Zu beachtende Symptome
- Motorkontrollleuchte leuchtet
- Getriebe rutscht zwischen den Gängen
- Hartes oder ruckhaftes Schalten
- Verzögerte Gangeinlegung
- Getriebe bleibt in einem Gang stecken
- Fahrzeug geht in den Notlaufmodus
CodePage.beforeReplacing
- Check fluid level and condition when the vehicle design allows it.
- Scan transmission module data, not only generic engine codes.
- Look for speed sensor, solenoid, and electrical codes before assuming internal transmission failure.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Wie man diagnostiziert
CodePage.commonMistakes
Assuming the transmission needs rebuilding before checking fluid, sensors, solenoids, wiring, and control-module codes. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P0700 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0700 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0700 code, your Kia will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0700?
Check fluid level and condition when the vehicle design allows it. Scan transmission module data, not only generic engine codes. Look for speed sensor, solenoid, and electrical codes before assuming internal transmission failure.
Join the Discussion
Reparaturkosten
Fuse, connector, wiring, cleaning, or basic inspection
Internal transmission repair or module programming after electrical checks
Beinhaltet Teile und Arbeit. Kann je nach Standort variieren.
Electrical repairs may be moderate; internal transmission repairs can be expensive and need professional confirmation.
DIY-Schwierigkeitsgrad
Can usually be performed at home with basic hand tools.