P0570 Code: Cruise Control System (P0570)
Note: We do not currently have verified model-specific diagnostic data for the Audi A4. The symptoms and fixes listed below are the standard generic OBD2 guidelines for the P0570 code. Always consult a factory service manual before replacing parts.
What does this mean?
Code P0570 indicates a problem with the cruise control system circuit.
Diagnostic system: Idle speed and throttle control
On a Audi A4, the P0570 code should be diagnosed as part of the idle speed and throttle control group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Audi A4
- Faulty cruise control module or switch
- Faulty brake light switch
- Damaged, chafed, or broken wiring harness
- Corroded or loose electrical connector
- Faulty vehicle speed sensor (VSS)
Symptoms to Watch For
- Check Engine Light is illuminated
- Cruise control not functioning
Before replacing parts, check these first
- Inspect intake leaks and throttle body carbon buildup.
- Check idle air or electronic throttle live data.
- Verify battery voltage and recent relearn procedures if the throttle body was cleaned or replaced.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
How to Diagnose
Common Mistakes
Replacing throttle parts before cleaning, checking air leaks, and completing the correct idle relearn. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
Frequently Asked Questions
Can I drive with the P0570 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0570 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0570 code, your Audi will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0570?
Inspect intake leaks and throttle body carbon buildup. Check idle air or electronic throttle live data. Verify battery voltage and recent relearn procedures if the throttle body was cleaned or replaced.
Join the Discussion
Repair Estimate
Fuse, connector, wiring, cleaning, or basic inspection
Major component replacement after live data and circuit tests confirm failure
Includes parts and labor. May vary by location.
Cleaning and relearn are cheap; actuator or throttle body replacement should be data-confirmed.
DIY Difficulty
Can usually be performed at home with basic hand tools.