P0373 Code: Timing Reference High Resolution Signal (P0373)
Note: We do not currently have verified model-specific diagnostic data for the Chrysler Pacifica. The symptoms and fixes listed below are the standard generic OBD2 guidelines for the P0373 code. Always consult a factory service manual before replacing parts.
What does this mean?
Code P0373 indicates a problem with the timing reference high resolution signal. This affects the PCM's ability to precisely time ignition and fuel injection.
Diagnostic system: Misfire and combustion
On a Chrysler Pacifica, the P0373 code should be diagnosed as part of the misfire and combustion group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Chrysler Pacifica
- Faulty crankshaft position sensor
- Faulty camshaft position sensor
- Stretched timing chain or worn timing belt
- Damaged, chafed, or broken wiring harness
Symptoms to Watch For
- Check Engine Light is illuminated
- Engine misfiring or shaking sensation
- Rough or unstable idle
- Engine cranks but won't start
- Engine stalling or dying unexpectedly
Before replacing parts, check these first
- Check spark plugs, coils, injector balance, and compression before replacing expensive parts.
- Review freeze-frame RPM/load to see when the misfire occurs.
- Look for fuel trim or vacuum leak codes that can cause multiple-cylinder misfires.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
How to Diagnose
Common Mistakes
Replacing ignition coils without moving coils, checking plugs, or confirming fuel and compression are healthy. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
Frequently Asked Questions
Can I drive with the P0373 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0373 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0373 code, your Chrysler will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0373?
Check spark plugs, coils, injector balance, and compression before replacing expensive parts. Review freeze-frame RPM/load to see when the misfire occurs. Look for fuel trim or vacuum leak codes that can cause multiple-cylinder misfires.
Join the Discussion
Repair Estimate
Spark plug, coil swap test, or connector repair
Major component replacement after live data and circuit tests confirm failure
Includes parts and labor. May vary by location.
Single-cylinder ignition fixes are often affordable; compression or timing problems require professional diagnosis.
DIY Difficulty
Can usually be performed at home with basic hand tools.