P0675 Code: Glow Plug Module / Supply Voltage (P0675)
Note: We do not currently have verified model-specific diagnostic data for the Mini Paceman. The symptoms and fixes listed below are the standard generic OBD2 guidelines for the P0675 code. Always consult a factory service manual before replacing parts.
What does this mean?
Code P0675 indicates a problem with the glow plug module control circuit or supply voltage (diesel engines).
Most Common Causes for Mini Paceman
- Failed glow plug or glow plug module (diesel)
- Damaged, chafed, or broken wiring harness
- Corroded or loose electrical connector
- Internal PCM/ECM failure
- Weak or failing battery
Symptoms to Watch For
- Check Engine Light is illuminated
- Diesel engine hard to start in cold weather
- Glow plug indicator light stays on (diesel)
- White or blue smoke from exhaust
- Rough or unstable idle
Before replacing parts, check these first
- Check for blown fuses related to the circuit.
- Inspect the wiring harness and electrical connectors for visible damage or corrosion.
- Verify the 12V battery is fully charged, as low voltage can trigger false codes.
- Look for obvious vacuum leaks or cracked hoses under the hood.
How to Diagnose
Common Mistakes
A very common mistake when diagnosing the P0675 code is automatically replacing the sensor or component mentioned in the code description without first testing it. Electrical issues, wiring damage, or vacuum leaks are frequently the true cause. Always use a multimeter and live data scanner to verify component failure before spending money on parts.
Frequently Asked Questions
Can I drive with the P0675 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0675 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0675 code, your Mini will automatically fail an OBD2 plug-in emissions or smog test.
Join the Discussion
Repair Estimate
Includes parts and labor. May vary by location.
DIY Difficulty
Can usually be performed at home with basic hand tools.