P0107 Code: MAP/Barometric Pressure Circuit Low Input
Note: We do not currently have verified model-specific diagnostic data for the Ram 2500. The symptoms and fixes listed below are the standard generic OBD2 guidelines for the P0107 code. Always consult a factory service manual before replacing parts.
What does this mean?
Code P0107 indicates the MAP sensor is sending an abnormally low voltage to the PCM, suggesting higher vacuum than expected or a sensor fault.
Most Common Causes for Ram 2500
- Faulty MAP (Manifold Absolute Pressure) sensor
- Damaged, chafed, or broken wiring harness
- Corroded or loose electrical connector
- Vacuum leak in intake system
Symptoms to Watch For
- Check Engine Light is illuminated
- Significant loss of engine power
- Engine stalling or dying unexpectedly
- Rough or unstable idle
Before replacing parts, check these first
- Check for blown fuses related to the circuit.
- Inspect the wiring harness and electrical connectors for visible damage or corrosion.
- Verify the 12V battery is fully charged, as low voltage can trigger false codes.
- Look for obvious vacuum leaks or cracked hoses under the hood.
How to Diagnose
Common Mistakes
A very common mistake when diagnosing the P0107 code is automatically replacing the sensor or component mentioned in the code description without first testing it. Electrical issues, wiring damage, or vacuum leaks are frequently the true cause. Always use a multimeter and live data scanner to verify component failure before spending money on parts.
Frequently Asked Questions
Can I drive with the P0107 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0107 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0107 code, your Ram will automatically fail an OBD2 plug-in emissions or smog test.
Join the Discussion
Repair Estimate
Includes parts and labor. May vary by location.
DIY Difficulty
Can usually be performed at home with basic hand tools.