P2107 Code: Throttle Actuator Control Module Processor
Note: We do not currently have verified model-specific diagnostic data for the Ram 2500. The symptoms and fixes listed below are the standard generic OBD2 guidelines for the P2107 code. Always consult a factory service manual before replacing parts.
What does this mean?
Code P2107 relates to the electronic throttle actuator control (drive-by-wire) system. When this system fails, the vehicle typically enters reduced power or limp mode.
Most Common Causes for Ram 2500
- Faulty electronic throttle actuator motor
- Dirty or faulty throttle body
- Faulty throttle position sensor (TPS)
- Damaged, chafed, or broken wiring harness
- Internal PCM/ECM failure
- PCM/ECM software needs update (TSB)
Symptoms to Watch For
- Check Engine Light is illuminated
- Vehicle enters reduced power / limp mode
- Poor acceleration or sluggish response
- Engine stalling or dying unexpectedly
- Erratic or fluctuating idle speed
- Abnormally high idle speed
Before replacing parts, check these first
- Check for blown fuses related to the circuit.
- Inspect the wiring harness and electrical connectors for visible damage or corrosion.
- Verify the 12V battery is fully charged, as low voltage can trigger false codes.
- Look for obvious vacuum leaks or cracked hoses under the hood.
How to Diagnose
Common Mistakes
A very common mistake when diagnosing the P2107 code is automatically replacing the sensor or component mentioned in the code description without first testing it. Electrical issues, wiring damage, or vacuum leaks are frequently the true cause. Always use a multimeter and live data scanner to verify component failure before spending money on parts.
Frequently Asked Questions
Can I drive with the P2107 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P2107 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P2107 code, your Ram will automatically fail an OBD2 plug-in emissions or smog test.
Join the Discussion
Repair Estimate
Includes parts and labor. May vary by location.
DIY Difficulty
Can usually be performed at home with basic hand tools.