P0518 Code: Closed Throttle Position Switch (P0518)
CodePage.genericDisclaimer
�Qu� significa esto?
Code P0518 relates to the closed throttle position switch circuit.
Diagnostic system: Idle speed and throttle control
On a Buick Envision, the P0518 code should be diagnosed as part of the idle speed and throttle control group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Buick Envision
- Sensor de posición del acelerador (TPS) defectuoso
- Cuerpo del acelerador sucio o defectuoso
- Arnés de cableado dañado o roto
Síntomas a tener en cuenta
- La luz de Check Engine está encendida
- Velocidad de ralentí anormalmente alta
- Ralentí irregular o inestable
- Velocidad de ralentí errática o fluctuante
CodePage.beforeReplacing
- Inspect intake leaks and throttle body carbon buildup.
- Check idle air or electronic throttle live data.
- Verify battery voltage and recent relearn procedures if the throttle body was cleaned or replaced.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Cómo Diagnosticar
CodePage.commonMistakes
Replacing throttle parts before cleaning, checking air leaks, and completing the correct idle relearn. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P0518 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0518 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0518 code, your Buick will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0518?
Inspect intake leaks and throttle body carbon buildup. Check idle air or electronic throttle live data. Verify battery voltage and recent relearn procedures if the throttle body was cleaned or replaced.
Unirse a la discusi?n
Estimación de reparación
Fuse, connector, wiring, cleaning, or basic inspection
Major component replacement after live data and circuit tests confirm failure
Incluye repuestos y mano de obra. Puede variar por ubicación.
Cleaning and relearn are cheap; actuator or throttle body replacement should be data-confirmed.
Dificultad de reparación (DIY)
Can usually be performed at home with basic hand tools.