P2015 Code: NOx Trap/Adsorber System (P2015)
CodePage.genericDisclaimer
¿Qué significa esto?
Code P2015 relates to the NOx adsorber/trap system, primarily used in diesel and lean-burn gasoline engines to reduce nitrogen oxide emissions.
Diagnostic system: General powertrain circuit
On a Dodge Dart, the P2015 code should be diagnosed as part of the general powertrain circuit group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Dodge Dart
- Catalizador adsorbedor de NOx degradado
- Sensor de NOx defectuoso
- Válvula EGR atascada o defectuosa
- Arnés de cableado dañado o roto
- El software del PCM/ECM necesita actualización (TSB)
Síntomas a tener en cuenta
- La luz de Check Engine está encendida
- Fallo en la prueba de emisiones
- Pérdida significativa de potencia del motor
- Disminución del rendimiento de combustible
- El vehículo entra en modo de potencia reducida
CodePage.beforeReplacing
- Record freeze-frame data and related codes before clearing the fault.
- Inspect wiring, connectors, vacuum lines, fluid leaks, and fuses tied to the named system.
- Use live data or a multimeter to confirm the failed circuit before replacing parts.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Cómo Diagnosticar
CodePage.commonMistakes
Treating the code description as a parts list instead of verifying the circuit, operating conditions, and related codes. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P2015 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P2015 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P2015 code, your Dodge will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P2015?
Record freeze-frame data and related codes before clearing the fault. Inspect wiring, connectors, vacuum lines, fluid leaks, and fuses tied to the named system. Use live data or a multimeter to confirm the failed circuit before replacing parts.
Join the Discussion
Estimación de reparación
Fuse, connector, wiring, cleaning, or basic inspection
Major component replacement after live data and circuit tests confirm failure
Incluye repuestos y mano de obra. Puede variar por ubicación.
Costs vary widely; start with visual inspection and circuit confirmation to avoid unnecessary parts.
Dificultad de reparación (DIY)
Can usually be performed at home with basic hand tools.