P0112 Code: Intake Air Temperature (IAT) Circuit Low Input
CodePage.genericDisclaimer
¿Qué significa esto?
Code P0112 indicates the IAT sensor is sending an abnormally low voltage signal (indicating high temperature) to the PCM.
Diagnostic system: Sensor circuit and live data
On a Lexus Rx, the P0112 code should be diagnosed as part of the sensor circuit and live data group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Lexus Rx
- Sensor de temperatura del aire de admisión (IAT) defectuoso
- Arnés de cableado dañado o roto
- Conector eléctrico corroído o suelto
Síntomas a tener en cuenta
- La luz de Check Engine está encendida
- Disminución del rendimiento de combustible
- Ralentí irregular o inestable
CodePage.beforeReplacing
- Inspect the connector for corrosion, broken locks, oil intrusion, or heat damage.
- Verify 5V reference, ground, and signal with a multimeter where applicable.
- Compare live sensor data to realistic engine temperature, pressure, airflow, or throttle values.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Cómo Diagnosticar
CodePage.commonMistakes
Replacing the named sensor without testing power, ground, signal, and wiring continuity first. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P0112 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0112 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0112 code, your Lexus will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0112?
Inspect the connector for corrosion, broken locks, oil intrusion, or heat damage. Verify 5V reference, ground, and signal with a multimeter where applicable. Compare live sensor data to realistic engine temperature, pressure, airflow, or throttle values.
Join the Discussion
Estimación de reparación
Fuse, connector, wiring, cleaning, or basic inspection
Major component replacement after live data and circuit tests confirm failure
Incluye repuestos y mano de obra. Puede variar por ubicación.
Sensor replacement can be moderate cost, but wiring and connector repairs are common and cheaper.
Dificultad de reparación (DIY)
Can usually be performed at home with basic hand tools.