Intake Air Temperature (IAT) Circuit Low Input
Qu'est-ce que cela signifie ?
Code P0112 indicates the IAT sensor is sending an abnormally low voltage signal (indicating high temperature) to the PCM.
Avertissement : Ce code de diagnostic fait partie du système OBD2 standard et peut s'appliquer aux modèles Kia Soul fabriqués de 1996 à 2026. Cependant, veuillez noter que la présence de ce code dépend de la configuration exacte du moteur, des options et de l'année de production.
Causes courantes
Capteur de température d'air d'admission (IAT) défectueux
Faisceau de câblage endommagé ou cassé
Connecteur électrique corrodé ou desserré
Symptômes à surveiller
- Le voyant moteur est allumé
- Consommation de carburant accrue
- Ralenti irrégulier ou instable
Comment Diagnostiquer
Solutions Courantes
Replace the Intake Air Temperature (IAT) sensor: This is the most frequent solution if the sensor itself is internally shorted, providing incorrect resistance readings, or has failed internally.
Repair or replace damaged wiring or connector: If diagnostic steps reveal a short to ground, an open circuit, or corrosion/damage within the IAT sensor's wiring harness or connector, repairing the specific section or replacing the entire connector/harness segment is necessary.
Address a short to ground in the IAT signal circuit: If the wiring tests indicate the signal wire is shorted to ground, locate and repair the short. This often involves tracing the harness carefully for chafing or damage.
Replace the Powertrain Control Module (PCM): In rare instances, if all sensor and wiring tests confirm integrity, the internal IAT circuit within the PCM itself may be faulty. This should only be considered as a last resort after exhaustive testing of the sensor and wiring.