P0604 Code: Internal Control Module RAM Error
CodePage.genericDisclaimer
Qu'est-ce que cela signifie ?
Code P0604 indicates an internal fault within the Lexus Engine Control Module (ECM) or Powertrain Control Module (PCM).
Diagnostic system: Control module, power, and communication
On a Lexus Ux, the P0604 code should be diagnosed as part of the control module, power, and communication group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Lexus Ux
- Défaillance interne du PCM/ECM
- Le logiciel du PCM/ECM doit être mis à jour (TSB)
- Batterie faible ou défaillante
- Faisceau de câblage endommagé ou cassé
Symptômes à surveiller
- Le voyant moteur est allumé
- Le moteur tourne mais ne démarre pas
- Le moteur cale de façon inattendue
- Le véhicule passe en mode dégradé
- Ralenti irrégulier ou instable
CodePage.beforeReplacing
- Check battery health, charging voltage, fuses, grounds, and module connectors.
- Look for network communication codes and multiple-module failures.
- Confirm power and ground before suspecting a failed PCM/ECM/TCM.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Comment Diagnostiquer
CodePage.commonMistakes
Replacing a control module before checking voltage supply, grounds, fuses, water intrusion, and connector condition. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P0604 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0604 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0604 code, your Lexus will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0604?
Check battery health, charging voltage, fuses, grounds, and module connectors. Look for network communication codes and multiple-module failures. Confirm power and ground before suspecting a failed PCM/ECM/TCM.
Join the Discussion
Estimation de réparation
Fuse, connector, wiring, cleaning, or basic inspection
Control module replacement and programming after power/ground verification
Comprend les pièces et la main-d'œuvre. Peut varier selon l'emplacement.
Power and ground repairs are often cheaper than module replacement, which may also require programming.
Difficulté de réparation (DIY)
Can usually be performed at home with basic hand tools.