P0136 Code: O2 Sensor Circuit Malfunction (Bank 1, Sensor 2)
CodePage.genericDisclaimer
Bu ne anlama geliyor?
Code P0136 indicates a malfunction in the downstream oxygen sensor circuit on Bank 1. This sensor monitors catalytic converter efficiency.
Diagnostic system: Sensor circuit and live data
On a Nissan Leaf, the P0136 code should be diagnosed as part of the sensor circuit and live data group. Related codes and live data from this same system can change the repair priority, so avoid replacing parts from the code name alone.
Most Common Causes for Nissan Leaf
- Arızalı oksijen (O2) sensörü
- Hasarlı, aşınmış veya kopuk kablo tesisatı
- Oksijen sensöründen önce egzoz kaçağı
- Arızalı veya tıkalı katalitik konvertör
Dikkat Edilmesi Gereken Belirtiler
- Motor Arıza Lambası yanar
- Yakıt tüketiminde artış
- Egzoz emisyon testinden kalma
CodePage.beforeReplacing
- Inspect the connector for corrosion, broken locks, oil intrusion, or heat damage.
- Verify 5V reference, ground, and signal with a multimeter where applicable.
- Compare live sensor data to realistic engine temperature, pressure, airflow, or throttle values.
- Check for blown fuses, weak battery voltage, and damaged connectors before buying major parts.
Nasıl Teşhis Edilir
CodePage.commonMistakes
Replacing the named sensor without testing power, ground, signal, and wiring continuity first. Always confirm the fault with freeze-frame data, live data, visual inspection, and circuit checks before spending money on parts.
CodePage.faq
Can I drive with the P0136 code?
If the check engine light is solid, you can usually drive to a safe location or mechanic. If the light is flashing, pull over immediately to prevent catastrophic engine or catalytic converter damage.
Will the P0136 code clear itself?
Once the underlying problem is fixed, the engine computer will run its self-checks. If it passes over several drive cycles, the light will turn off automatically. You can also clear it immediately using an OBD2 scanner.
Will this code fail an emissions test?
Yes. If the Check Engine Light is on due to the P0136 code, your Nissan will automatically fail an OBD2 plug-in emissions or smog test.
What should I check first for P0136?
Inspect the connector for corrosion, broken locks, oil intrusion, or heat damage. Verify 5V reference, ground, and signal with a multimeter where applicable. Compare live sensor data to realistic engine temperature, pressure, airflow, or throttle values.
Join the Discussion
Tahmini Tamir Maliyeti
Fuse, connector, wiring, cleaning, or basic inspection
Major component replacement after live data and circuit tests confirm failure
Parça ve işçilik dahildir. Konuma göre değişebilir.
Sensor replacement can be moderate cost, but wiring and connector repairs are common and cheaper.
Tamir Zorluğu
Can usually be performed at home with basic hand tools.